Order Exact Fuse Beads for Your Pattern
Order the exact quantity of beads your pattern needs in three simple steps: Enter your bead quantities, Check your selection, then Order everything to your cart.
Order
Paste color codes and quantities
Example
A01:120
B04:80
H07:50
Accepted formats:
A01:120, B04:80A01:120; B04:80A01:120(one per line)
Recorded Selection (Double-click to edit)
💡 To remove a color, click ✎ and set quantity to 0
No colors selected yet
Added to list
Studio tips
Ironing tips
What settings should I use to iron these beads?
- Melting point: around 140 °C
- Handheld press (LOKLiK): 150–160 °C, 30 seconds per pass, 4 to 6 passes
- Auto press (xTool): 150–155 °C, 20 kg, 50 to 60 seconds in one pass
- Result: one smooth side with no holes, the other side keeps the bead shape
- Beginner? Low temperature, short passes, check each time
Glow-in-the-dark beads use the same settings.
Before ironing: static and dust
- Beads not sliding well? Open the bag, breathe gently into it, then shake it once it’s slightly misted.
- Dust and hairs: brush your ironing sheet or baking paper with a soft brush before fusing.
Transferring with masking tape
- Rub the tape firmly with the edge of a grooved sorting tray or a standing bead tray (a stiff card works too).
- Turn the pegboard tape side down, tap the back of the board, then lift it off. The beads stay on the tape.